Partsam Amber LED ID BAR Light 3 3-Diode light Surface Mount Trailer Waterproof 12V, Sealed Amber Light Strip 3-Light Truck and Trailer Identification Light Bar w Black Base

Partsam offers an extensive line of high quality marker lights for car, bus, camper, caravan, RV, boat, lorry, trailer, van, truck, etc. Anyone of the three screws is the Negative and Red wire is the Positive end. Size: 363mm x 30mm x 29mm 14. 3'' x 1. 18'' x 1. 1''; hole distance: 215mm 8. 46''; installation scews are included.

Three sealed fully waterproof lamps are fastened on to a stainless steel bar. Package includes: 2 x amber id bar light markers partsam 2 x amber waterproof identification light bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide.

Three replaceable 3-led lights id bar universal for 12V Vehicles: Trucks and trailers as travel trailer, boat trailer, cargo trailer, RV, camper trailer, horse trailer, motorhome etc. Sealed, waterproof; surface mount, three-light, totally 9LEDs, 3-leds each light, Amber Lens Amber Light. East to install: the light contains a single lead wire for power and is grounded through the mounting hardware.

Stainless steel base is specially designed, passed the standard test. You can find all the marker lights you need in partsam! partsam 3-led bar light Amber, Stainess Steel Black BASE SEALED Specs: Led Qty: 3-LEDs in each light, 3 lights totally 9LEDs. Size: 363mm x 30mm x 29mm 14. 3'' x 1.

---

15" Red 9-LED Trailer Light Bar with Black Stainless Steel Bracket DOT Certified IP67 Submersible ID Marker Tail Light for 80" or Wider Trailers

We even incorporated a water drainage notch into our mounting bracket for additional protection against the elements. Convenient features simplify Operation & InstallationA Positive input wire and a Ground wire are attached to the bar for straightforward installation. Whether you mount this durable unit towards the top of your truck or trailer, or between the taillights, its premium-quality reflective red lens is designed to alert other motorists of your presence and enhance on-road safety during everyday operation.

Waterproof, submersible design weathers the elementsEmploying an IP67 waterproof and fully-submersible design, this ID bar is engineered to resist water and dust intrusion for supreme durability that cheaper ID bars can only dream of. Stainless hardware included. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.

5" centers. Enhance the visibility and safety of your 80″ or wider trailerbacked by a DOT FMVSS-108 certification, our 15″ trailer ID bar is an easy-to-install, feature-rich way to draw extra visibility to your 80″ or wider trailer. As an added bonus, the mounting bracket has notches for easy wire routing and simplified installation.

Features:dot fmvss-108 ratedsuperior waterproof sealpositive input wire and ground wire attachedfully-submersible ip67 ratedstainless steel construction and hardwareRequired ID light bar for trailers measuring 80″ or widerEasy, hassle-free installation What's Included?15" Trailer Clearance ID Marker Light BarPack of ScrewsInstruction Manual A must for 80" or wider trailers - trailers measuring 80" or wider require identification lights for additional visibility; mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety.

Dot-certified reflective lens - unlike cheaper, inferior quality ID bars, our unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations.


Similar products

---

iBrightstar 12V Submersible Square Trailer Tail LED Light kit Super Bright Brake Stop Tail License Lights for Camper Truck RV Boat Snowmobile Under 80" Inch Marine, Red/White

Note:ibrightstar led are strictly tested for sale!!! We offer fully " ONE YEAR " guaranteed for manufacturer defect. Ibrightstar is a registered brand with Amazon. Features function on left: 19 diodes 12 red+3 Red+4 White LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator.

Service life: up to 30, 000 Hours. Use ultrasonic welding technology to achieve IP68 Waterproof, Super Bright on boat, camper, snowmobile, or utility trailer. Warranty type: Exchange or replacement. Stainless hardware included. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.

5" centers. Set of 2 pack high brightness diodes led combination with better heat distribution, designed for 12v system. Please contact us if there is any questions or other requests! a must for 80" or wider trailers - trailers measuring 80" or wider require identification lights for additional visibility; mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety.

Dot-certified reflective lens - unlike cheaper, inferior quality ID bars, our unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations. Ip67 submersible rated - waterproof and entirely-submersible for unparalleled all-weather usability; mounting bracket features water drainage notch for added protection.

Solid construction - black bracket is made of long-lasting stainless steel, NOT substandard plastic like other light bar brackets.


Similar products

---

8 Feet, Weatherproof - MICTUNING Heavy Duty 7 Way Plug Inline Trailer Cord with 7 Gang Junction Box

Note:ibrightstar led are strictly tested for sale!!! We offer fully " ONE YEAR " guaranteed for manufacturer defect. Tidy your wire harness - 7-way copper blade molded into a heavy duty plug, provides a fast and simplified way for wires connection as well as keeping all your trailer wiring in order. Cautions: pls read the plug diagram carefully and refer to the diagram to install this 7 way plug.

Convenient trailer wiring - sturdy junction box with color marked 7-poles that can be easily identified, reverse light, gives you more convenience for wiring left/right turn light, brake signal lamp, tail light, etc. Excellent construction - adopted flameproof ABS junction box and good conductivity copper with solid cord, trailers, stronger and rugged, caravans, perfect for RVs, campers, food vans and other towed vehicles.

Flexible connection - 8ft long cord with soft and durable pvc housing that offers you plenty of flexibility to wire it from the front to the rear of your car. Not like others, only 4ft or 6ft. Best sealing performance - 4 open & 4 close rubber fitted grommets for option based on your wiring needs, making the whole junction box waterproof, dustproof and corrosion resistant.

. Also, we focus on offering the premium products to meet the needs of customers on the growing market. What you'll get:2 year mictuning warranty and lifetime best customer service, 1 x 7-Way Trailer Plug with Junction Box, 4x Open Grommets, 4x Close Grommets. Coming with 4 closed and 4 open rubber fitted grommets, it allows you to chose the right one for your unique wiring, convenient and practical! Warm Tips: Pls read the included diagram carefully before you install this trailer plug and follow the diagram to install it.




Similar products

---

Partsam 2 Amber + 2 Red 12V 4" x 2" Oval Led Truck Side Marker Light Surface Mount 10Diode, Sealed Trailer Led Clearance and Side Marker Lights, Black Base, Rectangular Rectangle Led Lights

2 led quantity: 10 diodes 3 voltage: 12v 4 color: red/amber 5 polycarbonate lens & housing are sonically sealed 6 Chemical resistance &100% waterproof Dimension: Size: 102mm x 51mm x 28mm 4" x 2" x 1. 1" hole distance: 77mm 3" wire length: 150mm 6" Screw size: 20mm x 3. 5mm 079" x 014" lxd 2 screws are included.

Features: 1 with the founction of side marker lamp / side clearance lamp / Identification light / Marker Trailer light etc. You can find all the marker lights you need in Partsam! Partsam 4" x 2" LED Oval Clearance Side Marker Light for truck trailer - Red/Amber Color. Used as led marker clearance light, clearance light, Auto side Lamp, identification light, trailer Light etc.

Universal for 12v vehicles like pickups, Trailers, Trucks, SUV van Caravan and Boat Lorry Bus Camper RV etc. Can also be used as combination side marker and clearance light when properly mounted. Dimension: 102mm x 51mm x 28mm 4" x 2" x 1. 1" ; hole distance: 77mm 3 inch. Stainless hardware included. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.




Similar products

---

10 pcs TMH® 3.8" 6 LED Red & Amber Side Led Marker 5 + 5 , Trailer marker lights, Led marker lights for trucks, Marker light amber, Rear side marker light, Truck cab marker lights, RV marker light

Modify as you want. Easy to install with FREE screw set included & Foam tape base. Pc lens + waterproof + shock proof + Dust Proof, UL Listed Power Wire. Tmh light come with 1 years warranty on free replacement in case of defect by factory. Stainless hardware included. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.

5" centers. Set of 2 pack high brightness diodes led combination with better heat distribution, designed for 12v system. Brand : tMH®. Functions as stop tail Rear/ Side reflector Side Marker and License Illuminator on left. Application: universal for trucks, bus, boat, semi-trailer, trailers under 80", dump Truck, special vehicle, tractors, etc.

Use ultrasonic welding technology to achieve IP68 Waterproof, it will prevent from any bad weather and diving with a Longer life span. Super bright with high visibility safety lights, big difference between Low and High brightness, EASY TO INSTALL. Specifications: you will receive 10 pcs of side Led Marker 5 pcs Amber light & Amber Lens + 5 pcs Red light & Red Lens.

High quality PC lens will not shade color off. Brightness : 120 lumen each light with 6 pcs High Quality SMD LED 50, 000hrs Life Time.


Similar products

---

Trailer Light Cable Wiring Harness 50ft spools 14 Gauge 7 Wire 7 colors

Perfect for car audio, Insulated, Home Theatre, Automotive. Excellent for any 6 vOLT - 80 VOLT application. Note:ibrightstar led are strictly tested for sale!!! We offer fully " ONE YEAR " guaranteed for manufacturer defect. Tidy your wire harness - 7-way copper blade molded into a heavy duty plug, provides a fast and simplified way for wires connection as well as keeping all your trailer wiring in order.

Cautions: pls read the plug diagram carefully and refer to the diagram to install this 7 way plug. Convenient trailer wiring - sturdy junction box with color marked 7-poles that can be easily identified, reverse light, gives you more convenience for wiring left/right turn light, brake signal lamp, tail light, etc.

Excellent construction - adopted flameproof ABS junction box and good conductivity copper with solid cord, caravans, campers, trailers, perfect for RVs, stronger and rugged, food vans and other towed vehicles. Flexible connection - 8ft long cord with soft and durable pvc housing that offers you plenty of flexibility to wire it from the front to the rear of your car.

Not like others, only 4ft or 6ft. Best sealing performance - 4 open & 4 close rubber fitted grommets for option based on your wiring needs, making the whole junction box waterproof, dustproof and corrosion resistant. Stainless hardware included. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.

5" centers.


Similar products

---

FXC 2x Car LED License Plate Tag Light 12V or Convenience Courtesy Door Step Lamp

Functions as stop tail Rear/ Side reflector Side Marker and License Illuminator on left. Application: universal for trucks, boat, special vehicle, semi-trailer, dump Truck, tractors, trailers under 80", bus, etc. Use ultrasonic welding technology to achieve IP68 Waterproof, it will prevent from any bad weather and diving with a Longer life span.

Super bright with high visibility safety lights, big difference between Low and High brightness, EASY TO INSTALL. Brightness : 120 lumen each light with 6 pcs High Quality SMD LED 50, 000hrs Life Time. Stainless hardware included. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.

5" centers. Set of 2 pack high brightness diodes led combination with better heat distribution, designed for 12v system. Offering customer technical service, feel free contact us for technical, installation and use question. Used as led marker clearance light, clearance light, Auto side Lamp, identification light, trailer Light etc.

Universal for 12v vehicles like pickups, Trucks, Trailers, SUV van Caravan and Boat Lorry Bus Camper RV etc. Can also be used as combination side marker and clearance light when properly mounted. Dimension: 102mm x 51mm x 28mm 4" x 2" x 1.


Similar products

---

IP65 DOT Compliant Reflective Lens Park/Brake/Turn ID Marker Brake Tail Light for Trucks - 2pc 16" 11 LED Red Trailer Light Bar Waterproof

14 gauge, 50' ft, Single Conductor. Easy to install with FREE screw set included & Foam tape base. Reflective lens design fulfills rear reflector requirementsOur red LED ID bar employs a sophisticated reflective lens design to meet rear reflector requirements for trailers, making it a more versatile ID bar than our competitors’.

Impossibly thin & impressively ruggedmeasuring just 5/8” thick, this waterproof IP65-rated ID bar utilizes a durable polycarbonate lens and housing for superior quality. The perfect multi-functional led id bar for your truck, and turn signal functionality and an easy-to-read wiring legend on the back of the unit, trailer & moreWith park, brake, the OLS 16” 11 LED ID Bar is an easy-to-install must-have lighting upgrade for your truck or trailer measuring 80 inches wide or more.

Functions as stop tail Rear/ Side reflector Side Marker and License Illuminator on left. Application: universal for trucks, special vehicle, bus, boat, tractors, dump Truck, trailers under 80", semi-trailer, etc. Use ultrasonic welding technology to achieve IP68 Waterproof, it will prevent from any bad weather and diving with a Longer life span.

Super bright with high visibility safety lights, big difference between Low and High brightness, EASY TO INSTALL. Note:ibrightstar led are strictly tested for sale!!! We offer fully " ONE YEAR " guaranteed for manufacturer defect. Tidy your wire harness - 7-way copper blade molded into a heavy duty plug, provides a fast and simplified way for wires connection as well as keeping all your trailer wiring in order.

Cautions: pls read the plug diagram carefully and refer to the diagram to install this 7 way plug.


Similar products

---

2 Red and 2 Amber - 4 PC 2" Round LED Light Side Marker - Two in One Reflector Light Polycarbonate Reflector 10 LEDs Rubber Grommet IP 67 for Trailers

Reverse polarity protection helps protect your clearance light from damage in the event that you miswire your light. Features: 180° Viewing AngleD. O. T. The round led side markers also come with a “TOP” orientation, while maximizing the amount of reflectiveness from each lens. 2 in 1 functionality - driving a tractor, or any other large vehicle mandates that you drive with side marker lights and reflectors depending on the size of your vehicle.

Fmvss-108 compliant. Stunning 180° visibility - each 2" round led clearance light comes with a protruded light for increased visibility. Simply use a preexisting hole, or create a new cut out for the grommet, and use the industry standard two prong plug to light up the night. Used as led marker clearance light, Auto side Lamp, identification light, clearance light, trailer Light etc.

Universal for 12v vehicles like pickups, Trucks, Trailers, SUV van Caravan and Boat Lorry Bus Camper RV etc. Can also be used as combination side marker and clearance light when properly mounted. Dimension: 102mm x 51mm x 28mm 4" x 2" x 1. 1" ; hole distance: 77mm 3 inch. 10 pcs 12v dc side marker light indicator light 3.

8'' x 0


Similar products

---

16" 12-LED Red Trailer ID Light Bar Brake + Sequential Turn Signal DOT Certified IP67 Submersible ID Marker Brake Tail Light for 80" or Wider Trailers

Easy to install with FREE screw set included & Foam tape base. Brake light & turn signal functionality in a single dot-approved id bargraced with DOT FMVSS-108 certification, our 16″ trailer ID bar is a simple-to-install, highly-functional way to attract extra visibility to your 80″ or wider trailer.

Additionally, all the metal fasteners on the unit are sealed for additional protection against inclement weather. User-friendly installation is a BreezeOur ID clearance light bar is designed to be easily installed by users of all mechanical aptitude. Functions as stop tail Rear/ Side reflector Side Marker and License Illuminator on left.

Application: universal for trucks, bus, semi-trailer, trailers under 80", boat, dump Truck, tractors, special vehicle, etc. Use ultrasonic welding technology to achieve IP68 Waterproof, it will prevent from any bad weather and diving with a Longer life span. Super bright with high visibility safety lights, big difference between Low and High brightness, EASY TO INSTALL.

Fmvss-108 compliant. Stunning 180° visibility - each 2" round led clearance light comes with a protruded light for increased visibility. Each led clearance light comes with 10 high powered LEDs, trailer, truck, allowing it to serve as both a reflector and clearance light that federal law requires for larger trailers.

This led clearance light is also D. O.


Similar products